Fleetwash release the Deluge Relocateable Truck Wash System Mark 2
Fleetwash CEO, Valentine Whitton, has announced the release of the HDD45 R, an enhanced version of the highly successful Heavy Duty Deluge Relocatable truck wash system. The Mark 2 is built around the proven all steel, heavy duty, wash base design in use over many years. The HDD45 R has proven itself on multiple installations within the mining and construction industry, in Australia and the export market as well. Known for its heavy hitting wash power, robust construction and versatility with the ability to be readily relocated to other site locations, as required, made this wash system the most popular Fleetwash truck wash system.
The Mark 2 has all these features plus more - the high quality 45kw motor pump, delivering 2400 lpm at 7 bar is now mounted together with the motor control centre and valve control systems and all located on a steel skid mount base making installation an uncomplicated task on any site.
The unique feature of the HDD45 R Mark 2 is in the design of the steel wash base with 6 heavy duty “I“ beams suspended over the full length of the wash bay and designed for 12 tonne axle load. The steel base is supported at each end of the engineer certified self-draining concrete wash bay and is designed for all road registered vehicles up to 3 metres wide with side mirror width allowance.
The Mark 2 wash is delivered from the factory in two main parts, ready to install with side spray retention walls and wash booms in place. The wash system is able to be placed directly into the prepared concrete wash bay pit making the Mark 2 ready for wash operations in as little as one day after delivery to site.
The HDD45 R provides washing to the underbody, wheels and sides of the vehicle through 5 wash booms, with two booms on each side, upper and lower body and wheels and one double-sided centre boom providing inside washing of wheels and guards and underbody whilst avoiding the electronically sensitive & drive train area of the vehicles.
The wash base is constructed of heavy duty galvanized steel with inverted steel angle for the drive over section of the wash bay. This design acts as a built-in shaker bar as the vehicle travels over the angled wash base creating tread deflection which assists in the removal of dirt and rubble caught within the tyre tread. The Mark 2 wash eliminates drag-out from sites onto the public road system ensuring EPA compliance, as well as providing clean underbody and wheels for more efficient site maintenance, making the HDD45 Mark 2 the preferred truck wash system of choice.
The HDD45 R Mark 2 wash system is fully automatic using the Fleetwash designed Automated Traffic Management System (ATMS) with traffic light control of vehicle movements inside the wash bay ensuring operator safety. Dual directional wash facility is available if required. The HDD45 R Mark 2 Truck Wash System comprises:
- 5 x boom wash system Underbody centre wash boom
- Wheel wash + outside/inside guards Wheel wash upper and lower body
- Gal steel drive over wash grate Spray retention shields
- Skid mount Motor pump & MCC Traffic Management System (ATMS)
- Hydraulically designed self-draining wash bay
Optional features available include Hi sides/ roof wash and/or load wetting spray bar and exit road wash
AUTHORISED PRESS RELEASE 9 JUNE 6 2016 – ENVIRONMENTAL SERVICES FLEETWASH 0296209629